(Updated: 02.2017)

* All the pdf files in this page are copyrighted. You may download them only if you are entitled to do so by your arrangements with various publishers.

Journal Articles (After 2012):
  • Yang, Y., Gao, S., Chen, K., Pan, Y., Guo, P., Vibration Analysis and Development of an Ultrasonic Elliptical Vibration Tool Based on a Portal Frame Structure. Precision Engineering. 2017. (View pdf)
  • Yang Y, Li L, Pan Y, Sun Z. Energy Consumption Modeling of Stereolithography‐Based Additive Manufacturing Toward Environmental Sustainability. Journal of Industrial Ecology. 2017.(View pdf)
  • Pan, Y., He, H., Xu, J. and Feinerman, A., Study of separation force in constrained surface projection stereolithography. Rapid Prototyping Journal,23(2), 2017. (View pdf) (news coverage)
  • Pan, Y., Patil, A., Guo, P. and Zhou, C., A novel projection based electro-stereolithography (PES) process for production of 3D polymer-particle composite objects. Rapid Prototyping Journal, 23(2), 2017. (View pdf)
  • Lu, L., Guo, P. and Pan, Y., Magnetic-field-assisted Projection Stereolithography for 3D Printing of Smart Structures. ASME. J. Manuf. Sci. Eng.; doi:10.1115/1.4035964. 2017. (View pdf)
  • Pan, Y. and Dagli, C. Dynamic Resolution Control in a Laser Projection based Stereolithography System. Rapid Prototyping Journal, 23(1), 2017. (View pdf)
  • Yang, Y., Guo, P. and Pan, Y., Structural Coloration of Metallic Surfaces with Micro/Nano-Structures Induced by Elliptical Vibration Texturing, Applied Surface Science, 402, pp. 400-409, 2017. (View pdf)
  • Pan, Y. and Chen, Y., Fast Mask Image Projection based Micro-stereolithography Process for Complex Geometry, Journal of Micro and Nano-Manufacturing, 5(1), p.014501, 2017.(View pdf)
  • Vellis, A.D., Gritsenko, D., Lin, Y., Wu, Z., Zhang, X., Pan, Y., Xue, W. and Xu, J., Drastic Sensing Enhancement Using Acoustic Bubbles For Surface-Based Microfluidic Sensors, Sensors and Actuators B: Chemical. 243, pp. 298-302, 2016. (View pdf)
  • Chen, K., Gao, S., Pan, Y. and Guo, P., Self-running and self-floating two-dimensional actuator using near-field acoustic levitation.Applied Physics Letters, 109(12), p.123503. 2016. (View pdf)
  • Pan, Y. and Chen, Y., Meniscus Process Optimization for Smooth Surface Fabrication in Stereolithography. Additive Manufacturing, 12, pp.321-333. 2016.(View pdf)
  • Nagarajan, H., Malshe, H., Haapala, K. and Pan, Y., Environmental Performance Evaluation of a Fast Mask Image Projection Stereolithography Process through Time and Energy Modeling. ASME Journal of Manufacturing Science and Engineering. 138(10), p.101004, 2016. (View pdf)
  • Yazdi, A. A., Popma, A., Wong, W., Nguyen, T., Pan, Y., & Xu, J., 3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications.Microfluidics and Nanofluidics, 20(3), 1-18. 2015. (View pdf)
  • Pan, Y. and Chen, Y., Smooth Surface Fabrication based on Controlled Meniscus and Curing-depth in Micro-Stereolithography, Journal of Micro and Nano-Manufacturing, 3(3):031001-031001-11. doi:10.1115/1.4030661. 2015. (View pdf)
  • Song, X., Pan, Y., and Chen, Y., Development of a Low-cost Parallel Kinematic Machine for Multi-directional Additive Manufacturing. Journal of Manufacturing Science and Engineering, Vol.137, No.2, 021005, 2015. (View pdf)
  • Pan, Y., Zhou, C., Chen, Y. and Partanen, J., Multi-tool and Multi-axis CNC Accumulation for Fabricating Conformal Features on Curved Surfaces. Journal of Manufacturing Science and Engineering, Vol. 136, No. 3, pp. 031007, 2014. (View pdf)
  • Zhao, X., Pan, Y., Zhou, C., Chen, Y. and Wang, C. L., An Integrated CNC Accumulation System for Automatic Building-around-Inserts. Journal of Manufacturing Processes, Vol. 15, No.4, pp.432-443, 2013. (View pdf)
  • Pan, Y., Zhao, X., Zhou, C. and Chen, Y., Smooth Surface Fabrication in Mask Projection based Stereolithography. Journal of Manufacturing Processes, Vol. 14, No. 4, pp. 460-470, 2012.(View pdf)
  • Pan, Y., Zhou, C., and Chen, Y., A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes. Journal of Manufacturing Science and Engineering, Vol. 134, No. 5, pp. 051011, 2012. (View pdf)
 Conference Proceedings (full paper review):
  • Lu, L., Tangen, K. M., Gabor, T., Pan, Y., Linninger, A. A. and Purandare, N. Additive Manufacturing of Subject-specific Spine Model for In-vitro Intrathecal Drug Delivery Study, ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC 2016, Aug. 21-24, 2016.
  • Pan, Y. and Lu, L. Additive Manufacturing of Magnetic Field-Responsive Smart Polymer Composites, ASME 2016 International Manufacturing Science and Engineering Conference, MSEC 2016, Blacksburg, Virginia, June 27-July 1, 2016.
  • Tangen, K. M., Gabor, T., Lu, L., Pan, Y., Sriram, N. and Linninger, A. A. Digital Manufacturing and in silico Modeling for rational design of drug delivery to the central nervous system, Summer Biomechanics, 2016 Bioengineering and Biotransport Conference.
  • He, H. and Pan, Y. Continuous Printing of Large Objects with Wide Solid Cross Sections.  NIST Measurement for Polymer AM Workshop, June 9-10, 2016.
  • Pan, Y. and Hu, M. A Data-Driven Modeling Approach for Digital Material Additive Manufacturing Process Planning, 2016 International Symposium on Flexible Automation, ISFA 2016.
  • He, H., Pan, Y., Xu, J., Yu, X. and Botton, V. Effect of Surface Texturing on Separation Force in Projection Stereolithography, 11th International Conference on Micro Manufacturing, ICOMM 2016, Irvine, California, March 29-31, 2016
  • Pan, Y. and Dagli, C. Dynamic Resolution Control in a Laser Projection based Stereolithography System. Solid Freeform Fabrication Symposium, Austin, Texas, Aug. 10-12, 2015
  • Pan, Y., Patil, A. and Zhou, C. A novel projection based electro-stereolithography (PES) process for composite printing. Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, Aug. 10-12, 2015
  • Malshe, H., Nagarajan, H., Pan, Y. and Haapala, K. Profile of Sustainability in Additive Manufacturing and Environmental Assessment of a Novel Stereolithography Process, Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference, MSEC2015, Charlotte, North Carolina, June 8-12, 2015
  • Pan, Y. and Chen, Y. Smooth Surface Fabrication based on Controlled Meniscus in Micro-Stereolithography, 9th International Conference on Micro Manufacturing, ICOMM 2014, Singapore, March 25-28, 2014
  • Song, X., Pan, Y., and Chen, Y., Development of a Low-Cost Parallel Kinematic Machine for Multi-Direction Additive Manufacturing, Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2013
  • Pan, Y. and Chen, Y., Fast Micro-Stereolithography Process based on Bottom-up Projection for Complex Geometry, Proceedings of the 8th International Conference on Micro Manufacturing, ICOMM 2013, March 25-28, 2013
  • Zhao, X., Pan, Y., Zhou, C., Chen, Y. and Wang, C. L., An Integrated CNC Accumulation System for Automatic Building around Inserts, Proceedings of 41st Annual North American Manufacturing Research Conference, June 10 – 14, 2013
  • Pan, Y., Zhou, C. and Chen, Y. Rapid Manufacturing in Minutes: The Development of a Mask Projection Stereolithography Process for High-speed Fabricating, Proceedings of the 2012 International Manufacturing Science and Engineering Conference, Notre Dame, Indiana, June 4-8, 2012
  • Pan, Y., Zhao, X., Zhou, C. and Chen, Y., Smooth Surface Fabrication in the Mask Projection based Stereolithography, Proceedings of 40th SME-North American Manufacturing Research Conference, NAMRC40-7715, Notre Dame, Indiana, June 4 – 8, 2012
  • Pan, Y., Chen, Y. and Zhou, C., Fast Recoating Methods for the Projection-based Stereolithography Process in Micro- and Macro-scales, Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 8-10, 2012
  • Pan, Y., Chen, Y. and Zhou, C., Fabrication of Smooth Surfaces based on Mask Projection Stereolithography, Proceedings of Solid Freeform Fabrication Symposium, pp. 263-278, Austin, Texas, August 8-10, 2011
  • Pan, Y., Zhou, C., Chen, Y. and Partanen, J., Fabrication of Conformal Ultrasound Transducer Arrays and Horns Based on Multi-axis CNC Accumulation, Proceedings of the 2011 International Manufacturing Science and Engineering Conference, MSEC2011-50139, Corvallis, Oregon, June 13 – 17, 2011
  • Pan, Y., Optimal Meniscus Planning in SL-related AM for Improvement of Surface Finish and Geometric Accuracy, Institute of Operational Research and Management Science (INFORMS) Annual Meeting 2014, San Francisco, CA, Nov. 12, 2014
  • Pan, Y. and Chen, Y., Process Planning and Optimization in Meniscus Control for Stereolithography, Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 5, 2014
  • Pan, Y., Zhao, X. and Chen, Y., Micro-Scale Fabrication in Large Area: Investigation on Integrating Large-Area and Micro-Scale Mask Image Projection Stereolithography, Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 14, 2013
 Non-refereed Conference Proceedings (Abstracts only):
  • Pan, Y. “Optimal Meniscus Planning in SL-related AM for Improvement of Surface Finish and Geometric Accuracy”, Institute of Operational Research and Management Science (INFORMS) Annual Meeting 2014, San Francisco, CA, Nov. 12, 2014.
  • Pan, Y. ,  Zhao, X., Chen, Y.  “Micro-Scale Fabrication in Large Area: Investigation on Integrating Large-Area and Micro-Scale Mask Image Projection Stereolithography”, Proceedings of Solid Freeform Fabrication Symposium, Austin, Texas, August 14, 2013.
Patents
  • Pan, Y. and Patil, A., “A Projection based Electro-Stereolithography Process for Composite Printing”, 62/304, 702, March 7, 2016, US
  • Pan, Y. and Xu, J., “A Method and Apparatus for Continuous 3D Printing”, 62/267, 629, December 15, 2015. US.
  • Chen, Y. and Pan, Y., “Process planning of meniscus shapes for fabricating smooth surfaces in mask image projection based additive manufacturing.” US20130313756 A1, November 28, 2013. US
  • Chen, Y. and Pan, Y., “Digital Mask Image Projection based Additive Manufacturing with Smooth Surfaces.”, 61/650, 244, May, 2012. US
  • Chen, Y. and Pan, Y., “A Fast Mask Projection Stereolithography Process for Building Digital Models in Minutes.”, 61/650,876, May, 2012. US